Airline Mogul Forum
Airline Mogul => Bugs => Topic started by: WoodlandAir on October 20, 2008, 09:06:22 pm
-
Airline ID:17331 Woodland Air [W14]
Route IDs: 66095, 43934
Aircraft IDs: 6679, 10090
First off, my Airline's overall LF is 99.94% but all my individual routes say 100%. It started after I made a 2nd route from Ottawa to Toronto but with a different plane. The LF dropped on the older route when I made the new one so I fixed the ticket price to go back to 100% and then the newer routes LF dropped. I went to fix it again but on the edit route page it said 100% so instead of changing anything I just clicked update route and the LF on that route changed to 100% at the same ticket price. In the course of writing this post the LF on the older route has gone back down to 85% and my overall down to 99.12%. This can't just be because I have two of the same route, because I have seen others with 3 of the same route.
EDIT: Ok, I seem to have found a balance. Both routes are 100% and the overall is 100%. It was just annoying there for a little while. I still think theres a bug there somewhere.
-
Not a bug.
By adding additional planes to an existing route, it adds to the competition on the route. Thus, you (and the other competitor) are artificially lowering fares in order to main 100% loads with your aircraft.
-
Well, my main point in making the post was the overall LF being under 100% when all my routes were 100%. I just thought I would explain the whole situation.
-
Right... as you have pointed out in your "edit", not all your routes were 100%.
-
Nevermind........ ???
They were all 100% at one point and had a overall LF of 99.94%. If thats not a bug then, ok.
-
Alright, I had this same problem. I had 174 routes on a world, all 174 of them were 100% under the individual listing. This has nothing to do with adding a 2nd flight to the same city pairs. It has to do with 100% @ 174 routes. Its showing 100% for each and EVERY individual flight.
-
Best to run a single flight at 2x frequency rather than compete with yourself by running two 1x flights
-
Go to view routes and in the sorting options choose all under 100%.
I had a problem where all I could see where 100% but overall was 99.99% or something. Once I fixed that they all went back to 100%.